How To Make A Drop Down Loft Hatch Door


Whatever you’re using your loft area for, whether it’s extra storage, upgrading your insulation, or even simply making any required repair work, simple access is a must. So with that in mind, we’ll show you how to make a fall loft hatch door that will make your life a lot simpler when it pertains to getting ‘up there’.

Generally, getting into home loft spaces was a cumbersome workout. Luckily, more recent homes primarily use updated fall loft hatches for ease of use, complete with insulated support for energy efficiency. If you’re looking to create a brand-new loft hatch, here’s what you require to know.

You don’t require to be a DIY professional when looking into how to make a fall loft hatch door, but some experience will assist. Always ensure you have the right tools for the task, wear security devices, and describe any maker’s handbook for guidelines and safe operation of any tools.

Preparation

Prior to you can install your loft hatch door, you’ll need to find and prepare a suitable opening in your ceiling. Simplest and convenient access is generally found in the corridor, however make sure your planned hatch is at least 100mm from any wall or obstruction. Using a stud, pipeline, and wire detector will make sure you’re not cutting into anything you shouldn’t. It will likewise detect your ceiling joists which will identify the last position of your access hole.

Use a pencil to mark where the joist edges are and where your hatch will be, and using a drill and appropriate drill bit, produce enough holes that will allow you to insert a handsaw. Then cut along the lines you’ve made. As soon as the hole is developed, the next step is to produce the loft hatch frame surround.

Your Loft Hatch Frame

Comprised of additional pieces of planed wood, around 20mm thick, careful measuring is needed as these are cut to size and attached at right angles to the ceiling joists, and alongside the joists themselves. These will develop the frame for your hatch door without putting unnecessary stress on the ceiling joists themselves.

By screwing or nailing each piece of wood into position, you’ll have a suitable frame to attach you hatch door to. However, don’t over tighten your nail or screw your frame fittings right now. This will make it simpler to move any piece, in case it’s not positioned properly very first time. As soon as whatever’s in its right position, tighten them all up.

Post Sponsored by Walthamstow Roofing – For All Your Roof Repairs in Walthamstow.

Leave a Reply

Your email address will not be published. Required fields are marked *